Be an informed Zodiac Collector. Check out the Vintage Zodiac Catalogs Website

Click for Mobile Forums

Author Topic: Seawolf bezel reattachment  (Read 2346 times)

Offline Jkmoore

  • VZ Team
  • ***
  • Posts: 6
Seawolf bezel reattachment
« on: January 30, 2016, 01:52:35 PM »
I have a Seawolf with the ceramic bezel which used a spring in the bezel assembly. It has been challenging reattaching the bezel. Any suggestions.

Thanks
Jeff

Offline Doogie

  • VZ Team
  • ***
  • Posts: 86
Re: Seawolf bezel reattachment
« Reply #1 on: January 31, 2016, 11:23:36 AM »
I close the spring until you have to stretch it to get it in place,then get the bezel started at one side and work it around until in is hung up on as little of the spring as possible the using a knife go in under the bezel and push the spring in while pushing down on the bezel..it works for me

Offline Ultra-Vintage

  • Moderator
  • *****
  • Posts: 621
  • Vintage Watch Fanatic
Re: Seawolf bezel reattachment
« Reply #2 on: February 01, 2016, 10:57:50 AM »
You can also try turning the bezel while you are pushing it down.  However, reattaching these bezels with acrylic insert/spring can seem nearly impossible on some of them

 

CopyrightŠ 2017, All Rights Reserved. This site may not be reproduced.
By accessing this web site you agree to not take any images for use on any other web sites.

Advertising Information  |  Privacy Policy  |  About Us 

Visit the Zodiac manufacture's web site at www.zodiacwatches.com for all your post-1990 Zodiac needs.
This web site is not affiliated with Fossil, Inc, current Zodiac brand owners

Website by Face Forward Studios

Clebar Watches
Zodiac Sign
  Top Watch Sites