Be an informed Zodiac Collector. Check out the Vintage Zodiac Catalogs Website

Author Topic: How to remove Zodiac Seawolf movement from case  (Read 1212 times)

Offline McHaggis

  • Forum Member
  • ***
  • Posts: 7
How to remove Zodiac Seawolf movement from case
« on: March 23, 2017, 02:39:57 PM »
After wetting my whistle on the Zodiac Glorious I immediately went after a Seawolf. I managed to track one down on eBay and promptly set about dissecting it to give it a good clean, the only problem is that after navigating the tricky caseback (fixed with a clamp and the blade from a Leatherman Skeletool) i came to an unusual problem, how to remove the movement from the case.

Its fairly messy inside it due to the gasket falling to bits after the years but i couldn't seem to get the movement out, rather than use excess force i thought i would come to the forum to ask the best way to do this. Attached are the pictures of the inside of the movement along with the front of the dial incase this model has any unique issues with it. There are a couple of screws which could be fastening it in place but i'm not sure. I've looked through the service cats on this site as well and couldn't immediately see anything.

I will be eternally grateful if anyone could point me in the right direction.

Offline YuriyV

  • Member
  • **
  • Posts: 427
Re: How to remove Zodiac Seawolf movement from case
« Reply #1 on: March 23, 2017, 03:48:39 PM »
Usually you need to do two things:
1. Remove winding stem (obviously you already did it);
2. Unscrew and remove two retaining shims (marked by red arrows below);

In addition to that I remove rotor as well. But it is up to you.
When above operations done, cover the watch with clean plastic film or piece of wood and turn it dial up. Put on the surface and lift the case. If there is no gummed dirt or melted gasket remnants, it should come off easily.

Offline McHaggis

  • Forum Member
  • ***
  • Posts: 7
Re: How to remove Zodiac Seawolf movement from case
« Reply #2 on: March 23, 2017, 03:53:35 PM »
Aha, excellent, i thought it might be something like that but i didn't want to touch those bits as I thought they might connect directly to the dial or something.



CopyrightŠ 2020, All Rights Reserved. This site may not be reproduced.
By accessing this web site you agree to not take any images for use on any other web sites.

Advertising Information  |  Privacy Policy  |  About Us 

Visit the Zodiac manufacture's web site at for all your post-1990 Zodiac needs.
This web site is not affiliated with Fossil, Inc, current Zodiac brand owners

Website by Face Forward Studios

Clebar Watches
Zodiac Sign