Hi,
I own 2 Astrographic SST watches, got both serviced but now I noticed that one
has the second ( red dot ) disc somehow stuck, it moves and then gets somehow jammed.
serviced recently?...send it back...or send it to :BGW: to get it done right the first time
I would send it back to them to address the issue. The discs can be a problem. They are prone to warping, and can get very roughed up at the hub over the years being taken on and off improperly so proper spacing is a definite necessity. They will likely have to remove and re-install properly to make sure there is enough clearance to prevent them touching one another.
Thanks, I am sending it to Ultra Vintage in the next couple of days.
BTW what size is the band width, some say 23mm and I have measured it and seems to be 24mm.
The original band measures 24mm.
The lug size on the square Astro cases are 24mm :sm3
Quote from: Ultra-Vintage on March 16, 2020, 01:24:27 PM
The lug size on the square Astro cases are 24mm :sm3
Thanks, will be shipping my Astrographic to you soon....
These are nice examples. They will be even better when you get them back! Thank you for sharing all this in the forum. Participation is always welcomed!
:sm3