Be an informed Zodiac Collector. Check out the Vintage Zodiac Catalogs Website

Author Topic: Spring bar question  (Read 2171 times)

Offline wheres_b

  • Newbie
  • *
  • Posts: 2
Spring bar question
« on: June 04, 2016, 06:33:29 pm »
Hi, first time poster here. Have a question on spring bar sizes for a vintage sea wolf. Is the spring bar 17.5mm or 18mm? Or can it be both? Also, does the thickness matter as they vary in sizes (e.g., 1.5 to 2.0 etc)?

I apologize if this question has been asked before. Did a search on the forum and I did not find this particular topic.

Thank you!

Offline incountry

  • Member
  • **
  • Posts: 294
Re: Spring bar question
« Reply #1 on: June 04, 2016, 09:19:01 pm »
 :welc to the site!  I can't help with your question but there are a lot of smart folks here that can probably answer your question.  You can also post your question at the "Ask BWG" section of the forum.  BWG is the resident VZ watchmaker.
Good luck in your quest for knowledge; you came to the right place!   :twothumbsup 

Offline jon p

  • Member
  • **
  • Posts: 1574
Re: Spring bar question
« Reply #2 on: June 04, 2016, 10:24:34 pm »
I have used 17MM and 18MM, either will work.  thickness...? I don't know, but I wouldn't think it matters.

Offline wheres_b

  • Newbie
  • *
  • Posts: 2
Re: Spring bar question
« Reply #3 on: June 07, 2016, 09:43:38 pm »
Thanks guys!

 

Copyright� 2021, All Rights Reserved. This site may not be reproduced.
By accessing this web site you agree to not take any images for use on any other web sites.

Advertising Information� |� Privacy Policy� |� About Us

Visit the Zodiac manufacture's web site at www.zodiacwatches.com for all your post-1990 Zodiac needs.
This web site is not affiliated with Fossil, Inc, current Zodiac brand owners

Website by Face Forward Studios

Clebar Watches
Zodiac Sign